Controller PS200
- controlling of the pump system and monitoring of the operating states
- mounted at surface (no submerged electronic parts)
- two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
- automatic reset 20 minutes after well probe turns pump off
- protected against reverse polarity, overload and high temperature
- speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
- solar operation: integrated MPPT (Maximum Power Point Tracking)
- battery operation: low voltage disconnect and restart after battery has recovered
- max. efficiency 88 % (motor + controller)
- enclosure: IP 54 (sealed, weatherproof)
|
Motor ECDRIVE 600 HR / 200 C
- brushless DC motor
- water filled
- dynamic slide bearings, material: carbon/ceramic
- wetted material: stainless steel (AISI 316), POM, rubber, cable drinking water approved
Pump end (PE)
- high life expectancy
- none-return valve
- dry running protection (optional)
- material: stainless steel (AISI 316), rubber
for HR pumps only
- helical rotor pump (positive displacement pump)
- two main parts only: stator and rotor, field servicable
- stator: geometry made of abrasion resistant rubber
- rotor: stainless steel, hard chrome plated, abrasion resistant
- more resistant to damage by sand than other pump types
- self-cleaning
|
